VET938 wheel loader
1)Production time: 25-30 days after the down payment
2)Package: 1 unit into 1x40HQ container
3)Deutz engine WP6G125E23 as standard
Cummins engine QSB5.9-C130-30 as optional
4)FOPS&ROPS Cabin as standard
5) European style quick hitch
6) YD13 Electric gearbox
7) The Max.Speed : 38km/h
8)Standard tires: 17.5-25
The loader takes large displacement pump, it will only take 9.2 seconds for the bucket to lift, discharge and descend. The lifting force of the boom can get up to 7 ton.
The joints like pins all adopts dust prevention design, and this extends the service life of pins and bushings.
The wIres and jackets all adopt flame retardant materials, which prevent fire when there is a short circuit.
The loader takes full closed cooling system, which can better reduce the water temperature in engine system and oil temperature in torque converter system, and improve the service life of the whole machine.
The load sensing full hydraulic steering system is very flexible, stable and reliable.
Middle articulation, 38°steering angle, small turning radius, more suitable to be applied in narrow work sites.
Big buCket withdrawal angle and high full-load coefficient, which can save time by 20% compared with loaders of the same operating weight.
In terms of overall length, the machine is 200mm longer than common 30 products, and it is more reliable during operation.
VET 938 specificationTechnical data:
|Standard bucket capacity:||1.8CBM|
|MAX. Traction Force:||≥105KN|
|MAX. Breakout Force:||≥96KN|
|MAX. Climbing Angle:||30degree|
|MAX. Dumping Height:||2950mm|
|Overall dimension:(L X W X H)||7100x2510x3170mm|
|Engine: Cummins, Perkins ,Deutz or Yuchai is optional|
|Transmission System:||Torque Converter: Single Phase,4 Elements, Twin-Turbine Hydraulic Torque ConverterTransmission: Planetary power shift|
|Travel Speed:||Gear Shift : I II Gear Shift I Forward(km/h): 0-13 0-38 Reverse(km/h) 0-17|
|Front Tire Pressure:||0.33-0.35MPa|
|Rear Tire Pressure:||0.27-0.29MPa|
|Type:||Articulated Load-Sensing Hydraulic steering system|
|Steering Angle:||38o 38o Each Side|
|Min. Turning Radius:||(Outside of bucket) 5912mm; (Outside of the rear tire) 5318mm|
|System Working Pressure:||16MPa|
|Boom lifting time:||≤5.3s|
|Service Brake:||Air Over Hydraulic Disc Brake|
|Parking Brake:||Internal Expansion|